Cambium Networks Mast Mount With Tilt Adjustment For CnWave V3000. Suitable For Masts With A Diameter Of 22 - 77 Mm...
€197.99
Ex Tax:€160.96Cambium Networks CnWave V3000 / PTP450/PTP450i Tilt Bracket Assembly. The Universal Mounting Bracket Fitting To cnWave V3000 And PMP450i, PTP450i Products...
€48.22
Ex Tax:€39.20Cambium Networks Telescope Mounting Kit For Precision Brackets An Alignment Telescope Provides The Most Accurate Option For Alignment Of The Precision Bracket During installation. The Telescope Is Temporarily Mounted On The Bracket Using The..
€22.14
Ex Tax:€18.00The Plastic Holder Is Designed To Mount The UCK-G2-PLUS From Ubiquiti Networks To 19" And 10" Racks. In The Case Of Mounting In A 19" Rack, It Is Possible To Mount On The Right, Left Or Two Holders Next To Each Other...
€21.43
Ex Tax:€17.42The Plastic Holder Is Designed To Hold Selected MikroTik Products (see Below) in 19" And 10" Racks. In The Case Of Mounting In A 19" Rack, It Is Possible To Mount On The Right, Left Or Two Holders Next To Each Other. The Internal Dime..
€16.17
Ex Tax:€13.14EasyBracketTM For EPMPTM Allows The Installation Of EPMP1000TM Radios To UBNT AirMAXTM Sectors, RF Elements Sectors And Other Antennas With Compatible Radio Quick-mounting System. EasyBracketTM For EPMPTM Is Made Of High Quality Polycarbonate. Installa..
€2.46
Ex Tax:€2.00Twin Horn Bracket Allows You To Install Two Symmetrical Horn Antennas With Exactly The Same Alignment. The Bracket Also Accommodates Mainstream 4x4 Radios, Such As EPMP™ 3000 Or Mimosa® A5c. High Density Sectors Or 4x4 Deployments Are Now Ingeniously S..
€103.19
Ex Tax:€83.90The Plastic Holder/stand Is Designed To Mount Selected TP-Link EAP Products (see Below) on A Table Or Wall. 3 Holes Are Made In The Base Measuring 83 × 100 Mm To Attach The Bracket To The Wall. The Overall Dimensions Of The Holder Are..
€19.87
Ex Tax:€16.16The Plastic Wall Mount Is Designed To Mount Halo H50 / H30 / S12 / S3 Mesh Access Points From Mercusys. The Holder Is Made Using 3D Printing, Has A White Color And Its Dimensions Are 123 × 40 × 91mm...
€13.50
Ex Tax:€10.97The Holder Is Designed To Attach TP-Link Deco E4 And M4 Wireless Units To The Wall Using Two Screws. The Holder Is Made Of PETG Material On A 3D Printer In A white Colour...
€13.50
Ex Tax:€10.97The Holder Is Designed For Attaching TP-Link Deco M5 And P7 Wireless Units To A Ceiling Or Wall Using A Single Screw. The Holder Is Made Of PETG Material On A 3D Printer In A white Colour...
€13.50
Ex Tax:€10.97